Bleached Tie-Dye Jeans - DIY

Posted: Jul 07 2014

Here’s what you’ll need: Jeans, rubber or plastic gloves, a plastic bucket, rubber bands, bleach, and water/sink

 

Make knots in the jeans with the rubber bands. There is really no wrong way to do this, just use as many as you want. The thicker the rubber bands, the heavier the dark spots. If you want sparse spots, use less rubber bands. It’s up to you!

Place rubber bands all the way around your denim ball so it doesn’t open up during its bath.

 

Rinse your denim ball so it’s thoroughly wet. Then pour 50/50 bleach and water into a bucket.

Gently place your jeans into the bucket. If they aren’t covered, either pour in more water/bleach or rotate every few minutes.

Let jeans sit for 20-60 minutes depending on the thickness of the denim and the desired color. The longer you leave them, the lighter they’ll get.

Tip: Don’t leave jeans soaking for too long or the bleach will start to eat away at the fabric. Just keep an eye on them!

When jeans have lightened up sufficiently, rinse them out and remove the rubber bands.

Note: Jeans will also get lighter as they dry.

Ring out excess water, and let jeans hang to dry. You can make this process shorter by tossing them in the dryer after they’ve sat for a little while.

Pair you new jeans with you favorite kicks, and wear them everywhere!

Make knots in the jeans with the rubber bands. There is really no wrong way to do this, just use as many as you want. The thicker the rubber bands, the heavier the dark spots. If you want sparse spots, use less rubber bands. It’s up to you!

Place rubber bands all the way around your denim ball so it doesn’t open up during its bath.

Comments

Leave a comment

Be the first to know! Join our email list and we'll send you exclusive offers and coupons. You can always Opt-Out